Used to break loose old supply lines and gas connectors without stripping the fittings. We carry two sizes so we're not forcing the wrong tool onto a stuck nut.
Water Heater Installation Cleburne TX Done Right the First Time
When your old tank quits, water heater installation Cleburne TX homeowners trust starts with a crew that pulls the permit, hauls the old unit, and pressure-tests every connection before we leave.
Serving cleburne and nearby areas.
How big is the job?
Upgrade
Larger tank or tankless conversion with new venting and gas line adjustments.
- 1. Standard swap Same-size tank replacement in a garage or closet with existing venting and gas.
- 2. Upgrade Larger tank or tankless conversion with new venting and gas line adjustments.
- 3. Full rework Relocation, gas line resize, and venting changes planned in writing first.
Drag the needle to compareTouch and drag the needle
- 30Services from one local team
- 20Areas served around cleburne
- Measure twiceCloset and clearance checked before ordering
- Pressure testEvery joint checked before we leave
What's Included in a Water Heater Installation
Every install we do includes the parts and labor that matter, not just the tank.

Work order
Water Heater Installation- New Water Heater Unit: We supply Rheem, Bradford White, AO Smith, or Navien units sized for your household. You don't have to haul a box home from the store.
- Permit and Inspection: Cleburne requires a permit for most water heater replacements. We pull it, schedule the inspection, and meet the inspector on site. You don't chase paperwork or wonder if the job was done legally. That matters when you sell the house or file a claim.
- Drain Pan and Expansion Tank: A new drain pan protects your floor if the tank ever leaks. An expansion tank absorbs pressure from thermal expansion and protects the T&P valve. Both are included in our standard quote. Skipping them is a common shortcut that costs you later.
- New Supply Lines and Fittings: We replace the flexible supply lines, the shutoff valve if it's frozen, and any corroded fittings. Copper pipe, PEX pipe, and CPVC pipe connections are all done to code. New Teflon tape and pipe sealant go on every threaded joint.
- Old Unit Haul-Away: We drain the old tank, disconnect it, and carry it out of your garage, closet, or attic. It goes on our truck and gets recycled through a local Johnson County scrap partner. No separate disposal fee, no tank on your curb.
- Final Pressure Test and Walkthrough: We fill the tank, check every fitting with a pressure gauge, and run a leak detection pass. The burner or element fires, and we set the temperature to 120°F. You get a walkthrough on the anode rod, the T&P valve, and the shutoff location before we leave.
What the first visit covers
First visit
We check the old unit, venting, gas line, shutoff valve, and drain pan, then measure the space for the new tank.
Water Heater Installation at Homes
We install tanks and tankless units in houses across Cleburne.
Leaking tank
Same-day swap when stock allows
Running out of hot water
Sized for your household peak demand
Tankless conversion
Venting and gas line work included
Rental property
Tenant coordination and photo documentation

Water Heater Installation at Businesses
We install and replace commercial water heaters for small businesses in Johnson County.
Restaurants
High-demand units sized for kitchen use
Salon and spa
Continuous hot water for multiple stations
Multi-family
Unit-by-unit replacement with tenant access
Water Heater Installation Cleburne TX: What the Job Really Involves
A water heater is a 10-to-15-year purchase, and the install matters as much as the tank. Done right, it runs quietly and safely for years. Done wrong, it leaks, fails inspection, or worse.
Water heater installation Cleburne TX is the removal of your old tank or tankless unit and the code-correct install of a new one, including the drain pan, expansion tank, T&P valve, venting, gas or electrical hookup, and water line connections. We start by shutting off the gas or breaker and the cold-water supply, then drain the tank through a garden hose to a safe drain. The old unit comes out, the pan gets cleaned or replaced, and we dry-fit the new heater before soldering or crimping anything. Every joint gets checked with a pressure gauge and a leak detection pass before we call it done.
Most Cleburne homes we service were built between the 1950s and the 2000s, and many still have original 40-gallon tanks tucked into tight closets or garages. When a tank starts leaking at the base or the pilot won't stay lit, you're usually looking at a same-week replacement, not a repair. We handle gas water heater installation Cleburne for natural gas and propane homes, plus electric and tankless conversions. If you're searching for water heater installation near me Cleburne TX because the tank is already dripping, call us first thing and we'll tell you honestly whether it's a repair or a replacement.

- What it is
- Removing an old water heater and installing a new one to code.
- When it helps
- Leaking tank, rusty water, or running out of hot water.
- What you get
- Hot water, a permitted install, and the old unit hauled away.
What to Expect During Your Install
From the first phone call to the final pressure test, here's the exact sequence. No mystery, no surprise add-ons halfway through the job.
Tools and Methods We Use on Every Install
Each method answers a different question. Together they leave very little to guess.
For copper pipe connections on the water lines. We solder every joint, then pressure-test it. Copper is still the gold standard for hot water lines in Texas homes.
For PEX pipe connections when we're running new lines. PEX is faster than copper and handles Cleburne's hard water without scaling the way copper can over time.
We check your home's water pressure before and after the install. If it's high, we install a pressure-reducing valve.
We use it to confirm no hidden leaks after the install. It also helps us find slab leaks and hidden supply line leaks that might be affecting your water pressure.
When to Schedule a Water Heater Installation
Your 12-year-old tank starts leaking on a Saturday morning and you have family coming for the weekend.
Call us first thing. We stock 40 and 50-gallon Rheem and Bradford White tanks on the truck and often have same-day slots.
HomesYou're remodeling a bathroom and want to upgrade from a 40-gallon tank to a tankless system for endless hot water.
We assess your gas meter capacity, venting options, and water hardness before recommending a Navien or Rinnai unit.
HomesYou're selling your Cleburne home and the inspector flagged the water heater as past its service life.
We install a new unit that meets current ICC Plumbing Code and Uniform Plumbing Code, pull the permit, and meet the inspector.
HomesYour rental property's water heater quit and the tenant is calling every hour.
We prioritize rental properties and property managers.
Businesses
How Water Heater Installation Works in Cleburne
Cleburne sits in Johnson County, and the local water is hard enough that tank life runs shorter than the national average. Most tanks we replace are 8 to 12 years old, not the 15 years you'd see in softer water cities. Winter freezes are a real factor here.
Downtown Cleburne
Historic homes with tight water heater closets and older gas lines. We measure clearances carefully and often use a shorter tank or a tankless unit to fit.
Buffalo Creek
Newer construction with garage or attic installs. Attic units run hotter in summer, so we check venting and recommend a pan with a drain line to the exterior.
Lake Pat Cleburne
Many homes here run on well water, which is harder than city water. We talk about water softeners and filtration alongside the install to protect the new tank.

- Downtown Cleburne
- Buffalo Creek
- Lake Pat Cleburne
- North Cleburne
- Henderson Street Corridor
From problem to finished result.
Slide to compare the photo with an illustrative inspection view. It is generated from the photo, not a measurement.
PhotoLeaking 40-Gallon Tank in Downtown Cleburne
Before: A 14-year-old 40-gallon tank was leaking from the base in a tight downtown Cleburne closet. The shutoff valve was frozen, and the drain pan was rusted through. The homeowner was mopping up water every morning and had already missed two days of work.
After: We replaced the tank with a 50-gallon Rheem, installed a new shutoff valve, a new drain pan with a drain line to the exterior, and an expansion tank. The install took four hours. Water pressure tested at 62 PSI, and the homeowner had hot water by 3 p.m. the same day.
Tankless Conversion in Buffalo Creek
Before: A family of five in Buffalo Creek had a 40-gallon tank that ran cold after the third shower. They were scheduling showers around each other and had already replaced two heating elements in three years. The gas line was undersized for a tankless unit.
After: We installed a Navien tankless unit, resized the gas line from 1/2-inch to 3/4-inch, ran new PVC venting through the garage wall, and installed a water softener to protect the heat exchanger. The install took seven hours. Now all five family members can shower back-to-back with no temperature drop.
Rental Property Swap on Henderson Street
Before: A property manager called us about a failed water heater in a Henderson Street rental. The tenant had been without hot water for two days, and the previous contractor had left the old tank on the curb. The gas line had a corroded drip leg and the venting was improperly sloped.
After: We installed a new 40-gallon Bradford White tank, replaced the corroded drip leg, corrected the venting slope to code, and hauled the old unit away. The install took three hours. We emailed the property manager photos of the finished work and the permit number for their records.
Problems a New Water Heater Installation Solves
A failing water heater doesn't fix itself. It leaks, it rumbles, it runs out of hot water, and eventually it floods your garage.
Tank leaking from the base or fittings
A leaking tank can flood your garage, closet, or attic within hours.
Running out of hot water too fast
A 40-gallon tank that once served a family of three now runs cold after two showers.
Rusty or metallic-tasting hot water
Rust in your hot water means the tank's glass lining has failed and the steel is corroding.
Popping or rumbling sounds from the tank
That noise is sediment boiling under the burner. It wastes gas, shortens the tank's life, and eventually cracks the glass lining.
Why Homeowners Choose Our Water Heater Installs
A new water heater is a 10-to-15-year purchase. Getting the size, venting, and code details right the first time saves you money, callbacks, and cold showers.
Hot Water Back Same Day
Most standard tank swaps take three to five hours from arrival to first hot shower.
Code-Correct Venting and Gas
We follow the ICC Plumbing Code and Uniform Plumbing Code on every gas water heater installation Cleburne job.
Old Unit Hauled Away
We drain, disconnect, and carry the old tank out of your garage, closet, or attic. It goes on our truck, not your curb.
Sized for Your Household
A family of five running out of hot water with a 40-gallon tank needs a 50 or 75-gallon unit or a tankless system.
What you receive on install day
Clear records you can keep and share.
Written quote
Price before we start, including parts and permit.
Permit record
Copy of the permit and inspection sign-off.
Install photos
Photos of the finished work for your records.
16 Years Installing Water Heaters in Johnson County
Cleburne Trailcrest Plumbing has been installing and servicing water heaters since 2010.

Gas line size
We check the line and meter capacity. Undersized gas lines can't feed a tankless unit without a resize.
Venting slope
We check the flue slope and material. Improper venting is the top cause of carbon monoxide callbacks.
Is your Cleburne address covered?
Type your ZIP code or town to check. If you're not listed, call and ask.
cleburne ZIP codes
- 76033
- 76031
Towns we serve.
Based in cleburne and covering the places around it. Pick one for local details.
What Cleburne Homeowners Say
Our 15-year-old tank started leaking on a Friday afternoon. Cleburne Trailcrest had a crew out Saturday morning with a 50-gallon Rheem on the truck. They pulled the permit, hauled the old unit away, and we had hot water by lunch. The price was exactly what they quoted on the phone. No surprises.
We switched from a 40-gallon tank to a Navien tankless unit. The crew ran new venting through the garage wall and resized the gas line. Took most of a day, but they cleaned up every bit of debris and walked me through the maintenance. Endless hot water for five people now. Worth every penny.
I manage six rental units in Cleburne. Cleburne Trailcrest has done four water heater replacements for me since 2010. They pull the permits, meet the inspector, and handle the tenants. I get a photo of the finished install and the invoice by email. That's how you keep a property manager's business.
Frequently Asked Questions About Water Heater Installation
Short answers for the first few minutes. The team can cover the rest.
Describe what you are seeing and we will point you to the right next step.
(682) 468-2111Electric swaps are usually on the lower end. Call (682) 468-2111 for a written quote based on your exact setup.
A standard tank swap takes three to five hours from arrival to hot water. Tankless conversions usually take six to eight hours because of venting and gas line work. If we hit a frozen shutoff valve or corroded fittings, add an hour. We schedule morning starts so you're not waiting all day, and we don't leave until the tank is full, tested, and the burner or element is running.
Yes. We drain it, disconnect it, and carry it out of your garage, closet, or attic. It goes on our truck and gets recycled through a local Johnson County scrap partner. You don't pay a separate disposal fee and you don't lift a 150-pound tank. That's included in every water heater install Cleburne TX quote we write.
A 40-gallon tank fits one to two people. A 50-gallon fits three to four. A family of five or more usually needs a 75-gallon tank or a tankless system. We check your peak demand, your gas meter capacity, and your closet dimensions before recommending a size. Oversizing wastes energy; undersizing means cold showers by the third person. We'll tell you honestly which one fits.
Get Your Water Heater Installation Cleburne TX Scheduled Today
(682) 468-2111We stock 40, 50, and 75-gallon Rheem and Bradford White tanks on the truck. Call before noon and you'll likely have hot water by evening. Upfront pricing, permit handled, old unit hauled away.
Contact Cleburne Trailcrest Plumbing
Call us at (682) 468-2111 or email info@cleburnetrailcrestplumbing.com. We answer the phone Monday through Friday, 8 a.m. to 6 p.m., and we run emergency calls after hours. If you leave a message, we call back the same day. Tell us what you're seeing and we'll tell you what it likely is and when we can get there.









