Sink installation Cleburne TX done right the first time

Sink installation Cleburne TX homeowners can count on starts with a proper measurement, a watertight seal, and supply lines that won't drip.

Serving cleburne and nearby areas.

How big is the job?

Upgrade

New sink type, faucet, or disposal added.

  1. 1. Simple swap Same-size drop-in sink, existing plumbing in good shape.
  2. 2. Upgrade New sink type, faucet, or disposal added.
  3. 3. Full remodel Countertop cut, new plumbing lines, multiple fixtures.
  • 30Services from one local team
  • 20Areas served around cleburne
  • Measure twiceWe check the opening and parts before starting.
  • Test every jointWe run water and check for leaks before leaving.

What our sink installation service includes

Every sink installation includes the essentials to get your sink working properly.

Sink Installation in cleburne : plumber is carefully lowering a new stainless steel kitchen sink into the countertop cutout

Work order

Sink Installation
  • Old sink removal and disposal: We disconnect the old sink, remove it, and haul it away. If you want to keep it, just let us know. We protect your countertop and floor during removal.
  • New sink setting and sealing: We set your new sink with the correct sealant or gasket for the material. For undermount sinks, we use mounting clips and ensure a flush fit. We check the alignment before securing it.
  • Faucet and drain connection: We connect the faucet, drain assembly, and P-trap. We install new supply lines and use Teflon tape on threaded fittings. We also connect the disposal if you have one.
  • Leak test and cleanup: We fill the sink, let it drain, and check every connection with a dry paper towel. We run the disposal and check the flange. Once everything is dry, we clean the work area and show you the finished job.

What the first visit covers

First visit

We measure the opening, check shutoff valves and drain lines, and confirm the new sink will fit.

Sink installation for Cleburne homes

We install kitchen and bathroom sinks in houses across Cleburne.

  • Kitchen sink replacement

    Drop-in or undermount, with faucet and disposal.

  • Bathroom vanity sink

    New sink and faucet for your vanity top.

  • Farmhouse sink install

    We cut the counter and set the apron-front sink.

  • Customer-supplied sink

    You buy it, we install it and test for leaks.

Toilet Repair in cleburne : plumber is adjusting the fill valve mechanism inside a toilet tank, with the tank lid removed

Sink installation for Cleburne businesses

We install sinks in commercial kitchens, offices, and retail spaces.

  • Commercial kitchen sinks

    Stainless steel and multiple-compartment sinks.

  • Office breakroom sinks

    Standard sinks with faucets and disposals.

  • Retail and salon sinks

    Vanity and utility sinks for customer areas.

Sink installation Cleburne TX: what the job actually involves

A sink that's installed correctly protects your cabinets and saves water. We measure, seal, and test every connection so you don't have to worry about leaks.

Sink installation Cleburne TX is the process of removing an old sink, prepping the countertop opening, setting the new basin, and connecting the drain, supply lines, and faucet so everything drains and seals correctly. It sounds simple until you're under a cabinet with a pipe wrench fighting corroded fittings. We handle drop-in, undermount, and farmhouse sinks in kitchens, plus vanity and pedestal sinks in bathrooms. Every install includes new supply lines, a fresh wax ring or silicone seal as needed, and a leak test before we pack up.

Most Cleburne homes were built between the 1950s and 1990s, and original cast iron or PVC pipe under the cabinet has often been patched more than once. That's why a sink install Cleburne TX often turns into a small repair job: a shutoff valve that won't close, a P-trap that's cracked, or a disposal flange that's rusted through. We check those parts before we start so you're not calling us back a week later. If you've been searching for sink installation near me Cleburne TX, we're local and we carry the common parts on the truck.

Toilet Installation in cleburne : plumber is connecting the water supply line to the back of a newly installed toilet tank
What it is
Removing an old sink and installing a new one.
When it helps
Cracked sink, remodel, or upgrading fixtures.
What you get
A watertight sink that drains properly.

How our sink installation process works

We keep it simple: you tell us what you want, we measure and quote, then we install and test.

  1. Call and schedule

    Call us or book online.

  2. On-site measure

    A technician arrives and measures the existing opening, checks the shutoff valves, and looks at the drain and supply lines.

  3. Remove old sink

    We shut off the water, disconnect the supply lines and drain, and cut the old caulk or clips.

  4. Install new sink

    We set the new sink with the correct sealant or gasket, connect the faucet and disposal, and attach new supply lines.

  5. Test and clean up

    We turn the water back on, fill the sink, and let it drain while checking every connection with a dry paper towel.

Tools and methods we use for sink installation

Each method answers a different question. Together they leave very little to guess.

Used to loosen and tighten drain fittings and supply lines. We carry multiple sizes to handle any connection under the sink.

Cuts copper and PEX supply lines cleanly. A clean cut ensures a proper seal and prevents leaks at the fitting.

Used to secure PEX fittings when we replace supply lines. It creates a permanent, leak-free connection.

For copper pipe repairs or modifications. We use it when we need to solder a new fitting or repair a damaged section.

Helps us find hidden leaks under the sink or in the wall. We use it to confirm the source before we start cutting.

When to schedule a sink installation

  • You're remodeling your kitchen and want a new farmhouse sink.

    We measure the cabinet opening, cut the countertop if needed, and install the farmhouse sink with a new faucet and disposal.

    Homes
  • Your bathroom vanity sink is cracked and you want to replace it.

    We remove the old sink, install a new vanity top and sink, and connect the faucet and drain.

    Homes
  • You bought a new sink online but need a professional to install it.

    We install customer-supplied sinks. Just have the sink and all parts ready. We'll check the fit, install it, and test for leaks.

    Homes
  • Your old sink is leaking and you need it replaced quickly.

    We offer same-day sink installation when possible.

    Homes

How sink installation works in Cleburne

Cleburne homes range from early 1900s builds near the Historic District to newer construction around Lake Pat Cleburne. Older homes often have cast iron drains and galvanized supply lines that can be brittle.

  • Downtown Cleburne

    Many historic homes here have original cast iron drains. We check for cracks and root intrusion before installing a new sink.

  • Lake Pat Cleburne

    Newer homes often have PEX supply lines. We match fittings and ensure the water pressure is balanced.

  • Sunset Heights

    Mid-century homes with galvanized pipes. We often replace corroded shutoff valves during a sink install.

Garbage Disposal Repair in cleburne : plumber is using an Allen wrench to manually clear a jam in a garbage disposal unit
  • Downtown Cleburne
  • Lake Pat Cleburne
  • Sunset Heights
  • North Cleburne

From problem to finished result.

Slide to compare the photo with an illustrative inspection view. It is generated from the photo, not a measurement.

Garbage Disposal Installation in cleburne : plumber is connecting the dishwasher drain hose to the side inlet of a newlyPhoto
  • Cracked kitchen sink replaced in one visit

    Before: A homeowner in Downtown Cleburne had a cast iron sink with a crack that leaked into the cabinet. The cabinet floor was water-stained, and the shutoff valves were frozen.

    After: We removed the old sink, replaced both shutoff valves, installed a new stainless steel drop-in sink with a new faucet, and sealed the cabinet floor. The job took about 3 hours, and the leak was gone.

  • Undermount sink reattached in Sunset Heights

    Before: An undermount sink in Sunset Heights had separated from the countertop, leaving a gap that allowed water to seep into the cabinet. The adhesive had failed.

    After: We removed the sink, cleaned the old adhesive, and reinstalled it with new mounting clips and silicone. We also replaced the P-trap. The sink is now flush and watertight.

  • Bathroom vanity sink upgrade in North Cleburne

    Before: A North Cleburne homeowner had a dated bathroom vanity with a cracked sink and a dripping faucet. The supply lines were corroded.

    After: We installed a new vanity top with an undermount sink, a new faucet, and new supply lines. We also replaced the shutoff valves. The job took 4 hours and the drip stopped.

Common sink problems we solve in Cleburne

Sinks fail in predictable ways. Here are the issues we see most often and how we fix them.

Ask about yours

  • Cracked or chipped sink basin

    A cracked sink can leak water into the cabinet, causing wood rot and mold. Even a small chip can spread and lead to a bigger break.

  • Leaking drain or P-trap

    A leaking drain can warp the cabinet floor and create a breeding ground for mold. It also wastes water and can damage stored items.

  • Corroded shutoff valves

    Old shutoff valves can seize or leak when you try to turn them off. That turns a simple sink replacement into a water emergency.

  • Undermount sink falling away from counter

    Undermount sinks can separate from the countertop if the adhesive fails. That leaves a gap where water can get in and damage the cabinet.

Why a proper sink installation matters

A sink that's installed correctly protects your cabinets, your countertop, and your water bill. Here's what you get when the job is done right.

No leaks, no callbacks

We pressure-test every supply line and drain connection before we leave.

Correct cut, clean countertop

Undermount and drop-in sinks need different cutout dimensions, and getting it wrong means a cracked countertop.

Code-compliant drain and vent

Texas follows the Uniform Plumbing Code, and that means your sink drain needs a proper P-trap and an air admittance valve or vent connection.

Disposal and faucet done together

If you're replacing the sink, it's the right time to install a new faucet and garbage disposal.

What you receive

Clear records you can keep and share.

  • Written estimate

    Price before we start, no surprises.

  • Install photos

    Before and after pictures of the work.

  • Parts list

    Record of any new valves or lines installed.

Before work starts

A plan in writing

Ask for a written scope

16 years of sink installation experience in Cleburne

Cleburne Trailcrest Plumbing has been installing sinks since 2010.

Plumbing in cleburne : plumber is in a clean, well-organized service vehicle, selecting specific tools from a clearly

Shutoff valve condition

We turn the valve to check if it closes fully and doesn't leak.

Drain line flow

We run water and watch how fast it drains to spot clogs.

Cabinet floor

We check for water stains or soft spots that mean past leaks.

Is your Cleburne address covered?

Type your ZIP code or town to check. If you're not listed, call and ask.

cleburne ZIP codes

  • 76033
  • 76031

What Cleburne homeowners say

We had a cracked kitchen sink that was leaking into the cabinet. Cleburne Trailcrest came out the same day, replaced the sink and the disposal, and even fixed a corroded shutoff valve. The price was exactly what they quoted. No mess left behind. I'd use them again for sure.
Sarah M.Homeowner, Downtown Cleburne
I bought an undermount sink online and needed it installed. They measured, cut the countertop, and had it done in about three hours. They showed me the old P-trap was cracked and replaced it. Everything drains perfectly now. Fair price and good communication.
James R.Homeowner, Lake Pat Cleburne
Our bathroom vanity sink was original to the house and looked terrible. They installed a new sink and faucet, and also replaced the supply lines. The technician was polite and cleaned up after himself. It's nice to find a local company that does what they say.
Linda T.Homeowner, Sunset Heights

Frequently Asked Questions

Short answers for the first few minutes. The team can cover the rest.

Still have a question?

Describe what you are seeing and we will point you to the right next step.

(682) 468-2111

We give you a written quote before we start, so you know the number upfront.

A typical sink replacement takes 2 to 4 hours from start to finish. That includes removing the old sink, installing the new one, connecting the faucet and drain, and testing for leaks. If we're cutting a new countertop opening or running new supply lines, plan on 4 to 6 hours. We schedule a window and keep you updated.

Yes, we install customer-supplied sinks all the time. Just have the sink, faucet, and any mounting hardware on site when we arrive. We'll inspect the parts and let you know if anything is missing or incompatible before we start. There's no extra charge for using your own sink, and the labor rate stays the same.

We install both kitchen and bathroom sinks, including drop-in, undermount, farmhouse, vanity, and pedestal styles. For kitchens, we also handle garbage disposals, dishwashers, and faucet replacements. For bathrooms, we can replace the vanity top and sink together. If you're not sure what will fit, call us and we'll help you measure.

Ready for sink installation Cleburne TX? Call today

(682) 468-2111

Call now for a free estimate and same-day availability. We'll bring the parts and get it done right.

Contact Cleburne Trailcrest Plumbing

Call us at (682) 468-2111 or email info@cleburnetrailcrestplumbing.com. We answer the phone Monday through Friday, 8 a.m. to 6 p.m., and we run emergency calls after hours. If you leave a message, we call back the same day. Tell us what you're seeing and we'll tell you what it likely is and when we can get there.

Call now(682) 468-2111